Router Forums banner
1 - 1 of 7 Posts

· Retired Moderator
16,386 Posts
I don't use a miter track either. I either use a push block along the fence or I have a couple of jigs I use for doing half laps or the profile on the end of cabinet door rails that rides along the edge of the table instead. The construction allows me to clamp the piece I'm working on to the jig easily too. Feather boards can be made longer so that they can be clamped to the table rim or fence mounted to so you don't have to have that slot for those either.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.