Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,904 Posts

·
Registered
Joined
·
1,904 Posts
You don't need a collar the bit you would use is determined by the thickness of the wood that you are using for the template. And yes the pattern needs to be a little larger or smaller to accommodate the size of the bearing. You can either route into the post or make a template to cut the arrow shape out of a separate piece of wood. There is probably stuff on Youtube about using a template with a router.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top