Tom, super site. Hate to see you take a "vacation". Looking forward to your articles elsewhere.template tom said:
steveo
Routing Tips and Techniques
Hi all
I will be taking a break from the forum as I intend sitting down to write down some of my experiences with the router and maybe send them to the various routing magazines that may be interested. I have put up a home page that may be of interest to some people who are new to routing and those who may wish to learn new techniques with the router.
If you are interested log on to www.wa1.quik.com.au/tod
I am limited to what I can submit due to lack of web space.
Note I have nothing to do with Carb-I-Tool I have only had great satisfaction with their cutters over the past 35 years.
Tom
I will be taking a break from the forum as I intend sitting down to write down some of my experiences with the router and maybe send them to the various routing magazines that may be interested. I have put up a home page that may be of interest to some people who are new to routing and those who may wish to learn new techniques with the router.
If you are interested log on to www.wa1.quik.com.au/tod
I am limited to what I can submit due to lack of web space.
Note I have nothing to do with Carb-I-Tool I have only had great satisfaction with their cutters over the past 35 years.
Tom
1 - 16 of 16 Posts
steveo
Great job Tom! Don't be gone too long.
You are quite the routerman I stand far in your shadows.........template tom said:Hi all
I will be taking a break from the forum as I intend sitting down to write down some of my experiences with the router and maybe send them to the various routing magazines that may be interested. I have put up a home page that may be of interest to some people who are new to routing and those who may wish to learn new techniques with the router.
If you are interested log on to www.wa1.quik.com.au/tod
I am limited to what I can submit due to lack of web space.
Note I have nothing to do with Carb-I-Tool I have only had great satisfaction with their cutters over the past 35 years.
Tom
Are you planning an publications that we in the US might see?
I have been trying to do an write up since last Sept. Just something simple for a general magazine here in the US. I've started I don't know how many times and did sketches and changed this and that but I can never seem to get it the way I want it....... I hope your project fairs better then mine has.
Please at least check in once in a while to keep us all honest. And hey someday they might have things you can use your points for......
Ed
Tom great thing you are doing. Wishing you well in your endeavors to promote routerism. Did I just create a new word. LOL
Routerism, hmmm... yup, I think so! I like that. 
Boricua
Boricua
Does that make Tom a "Routerian"? Or perhaps a "Routerite"?ejant said:Tom great thing you are doing. Wishing you well in your endeavors to promote routerism. Did I just create a new word. LOL
My apologies to those who may have tried to access my home page. My computer skills are not as good as my Router skills and I had to spend some time repairing the site. It is up again and as I promised I will try and change a few pages next month. If you have never used template guides before this is the place to start from. Look at the introduction to template guides to get you going. I know it is not the same method you have been using for years and yes you do have to spend some time preparing jigs and templates but in the end you will find it all worth while. Thanks to those who have posted and/or emailed me with their comments and encouragement. All I can say is at least give it a try. Best of luck.template tom said:Hi all
I will be taking a break from the forum as I intend sitting down to write down some of my experiences with the router and maybe send them to the various routing magazines that may be interested. I have put up a home page that may be of interest to some people who are new to routing and those who may wish to learn new techniques with the router.
If you are interested log on to www.wa1.quik.com.au/tod
I am limited to what I can submit due to lack of web space.
Note I have nothing to do with Carb-I-Tool I have only had great satisfaction with their cutters over the past 35 years.
Tom
Just as a matter of interest I have enclosed a photograph of one of my projects. It was a cabinet designed to fit into and coverup and block off a doorway
Tom
Wow on that door frame cabinet very very nice work.
i can't log on to the website
Sorrycrafty Dale said:i can't log on to the website
Crafty Dale I am in the process of trying to rectify the problem since I changed my IP
Tom
What he said!!crafty Dale said:i can't log on to the website
I still have not been able to show my web pagedlane6110 said:What he said!!
I have been contacting a Free Hosting and I may be able to invite you to join if I have your email address
Tom
Nice work on the doorway cabinet.
Sorry, but I'm unable to open your website. It says I'm not authorized to view the site. Error 403 Forbidden. Thanks
Sorry, but I'm unable to open your website. It says I'm not authorized to view the site. Error 403 Forbidden. Thanks
Tom, If you get your site up and running, please include me in your mailing list. [email protected]
Sorry I have not been able to submit a web site as I am working on a collection of materialPop_pop1 said:Tom, If you get your site up and running, please include me in your mailing list. [email protected]
Tom
1 - 16 of 16 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Router Forums
A forum community dedicated to router and woodworking professionals and enthusiasts. Come join the discussion about different types of routing and routers, shop safety, finishing, woodworking related topics, styles, tools, scales, reviews, accessories, classifieds, and more!
Full Forum Listing
Recommended Communities
