Router Forums banner

Routing with template guides

2959 Views 2 Replies 2 Participants Last post by  template tom
The project has been completed with the router only and with the use of the template guides
1 - 3 of 3 Posts
That's really neat template tom used the router and templates just like you were a carver. What size block of wood did you make this out of and what type of wood is it?
Base was 240 x 240mm x 30mm thick and the top was the same size but only 16mm thick
The timber is a local timber called Jarrah
Local to Western Australia
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.