Router Forums banner
1 - 1 of 6 Posts

· Registered
323 Posts
Take your collet off and check it under a magnifier for cracks. As Stick suggested measure your bit to make sure it is a 1/4" or 1/2" shank and that the colle is also 1/4" or 1/2". If the router could have come from Canada it might have metric collets but most likely either the collet is broken or the bit is the problem.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.