I'm totally inexperienced with routers and looking to start out small...with a trim router for carving lettered signs. I'm sure there are much better brand names, but I'm looking to start cheap until I know that (#1) I have the talent for this (#2) it's something I'll stick with. So, anyone have comments, reviews, advice related to the Ryobi TR45 Trim Router? I found it at one of the "big box hardware stores" for $79.99. Thanks in advance for any thoughts (good or bad, I'm a big girl)!
ncparolelady
I cannot speak to that model, but i have two ryobi routers one is 6 years old ,and they work very well. I think ir's a good place too start out. You may find that the weight may be about the same as a 1/4 in full size. Then you have a larger base for controll. That being said, It 's still a great place to start, and overall, have fun.
Hi ncparolelady
I'm sure you must have a router by now but if not you may want to take a hard look at the trim router below, it's at the right price and it's a good one to start out with
1/4" Trim Router at 25.oo dollars
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=44914
=========
I'm sure you must have a router by now but if not you may want to take a hard look at the trim router below, it's at the right price and it's a good one to start out with
1/4" Trim Router at 25.oo dollars
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=44914
=========
Hi NCparolelady,
If you want to start off with a relatively cheap, pretty dependable unit with a few included accessories as well as a carrying case, check out the MLCS Marvel 40 router kit. It is on sale now for $90.00 and comes with free shipping. I have had mine for two years now and it workks well for trimwork, sign work and small router jobs. The only drawbacks are it not being a plunge router (few, if any, trim routers are), does not have a variable speed control built in or a soft start feature and only accepts 1/8" and 1/4" shanked bits. Other than that I like it. The Bosch colt is a step up with variable speed control, but the goodies are extra. Good luck with whatever decision you make.
Joe Z.
If you want to start off with a relatively cheap, pretty dependable unit with a few included accessories as well as a carrying case, check out the MLCS Marvel 40 router kit. It is on sale now for $90.00 and comes with free shipping. I have had mine for two years now and it workks well for trimwork, sign work and small router jobs. The only drawbacks are it not being a plunge router (few, if any, trim routers are), does not have a variable speed control built in or a soft start feature and only accepts 1/8" and 1/4" shanked bits. Other than that I like it. The Bosch colt is a step up with variable speed control, but the goodies are extra. Good luck with whatever decision you make.
Joe Z.
Hi Joz Z
I one I got came with a plunge router fixture .. not the best but I did rework just a little bit and now it works great for that plunge router jobs..
Plus I do use the HF router speed control on it.. it's not soft start but that's OK.
And I do use it from time to time in the router table ...
And like you I like it
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/marvel_3in1_router.html
========
I one I got came with a plunge router fixture ..
not the best but I did rework just a little bit and now it works great for that plunge router jobs..Plus I do use the HF router speed control on it..
it's not soft start but that's OK.And I do use it from time to time in the router table ...
And like you I like it
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/marvel_3in1_router.html
========
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
