Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
387 Posts
Hi, Tiredbones. PC guides are all 1 3/16ths. but what is the required guide to do the job? 5/8ths 1/2" . Oak-Park sells 7 inch square base plates if you get one that fits your
TR 8, you could use the Oak Park guide and ring nut. They are 1 1/2" but you can buy just the size guide that you need . ie 5/8 ths 1/2" etc. Hope this helps.
Woodnut65
 

·
Registered
Joined
·
387 Posts
Hi TB: Would the adapter in the set of guides that BJ shows do any good for your problem? I have that set of guides with that adapter and I have no use for it.
Where abouts are you located? Maybe I could mail it to you. Woodnut65
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top