Router Forums banner


2864 Views 4 Replies 5 Participants Last post by  harrysin
what type of bit do I need to make scallops around the edges of a project? I've got several bits, but have never done scallops. I've been commissioned to do a project for a Ranch, & I was thinkin' the scallops would look the best. Any help would be appreciated.
1 - 1 of 5 Posts
Here's a simple way to do the scallops using a 45º chamfer bit with a bearing.

  • Like
Reactions: 2
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.