Router Forums banner

screw definition

6277 Views 2 Replies 3 Participants Last post by  reible
If a project calls out for a #5 x 1-1/4" Fh woodscrew,,,,,,,,,,,,,,,,,,,,,,,
what does the Fh stand for? and what does it mean

1 - 3 of 3 Posts
I always thought Flathead!

The most common are FH = flat head, PH = pan head, and OH = oval head

A #5 is a little uncommon, it might be a misprint and if so I would guess on a #6 BTW the range is from #0 to a #24 the common ones for assembly are #6, #8, #10 and #12. Size of #4 and below are often used with mounting hardware (hinges etc).

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.