Router Forums banner

Sears 315.17381 Owner/Operator Manual

31507 Views 15 Replies 13 Participants Last post by  DonChris
Attached is the owner/operator manual in PDF format for the subject router... It includes the mechanical and electrical pictures plus parts lists with part numbers for maintenance on this router....... Enjoy..... Dave

Attachments

  • Like
Reactions: 3
1 - 16 of 16 Posts
Thanks for the manual. Stress, is only one state of mind, choose another

Attached is the owner/operator manual in PDF format for the subject router... It includes the mechanical and electrical pictures plus parts lists with part numbers for maintenance on this router....... Enjoy..... Dave
Thanks for the manual.

Stress, is only one state of mind, choose another
  • Like
Reactions: 1
Router manual

Thanks Dave for the PDF file for router manual.
Thank You.

I recently picked up the router at a thrift store and honestly haven't used a router since wood shop in HS, over 20 years. Just getting started and the manual will be a good place to begin. Thanks Again.
Craftsman 315.17381

Good Lord!!!!
This was my father's router (and I'm 68 years old). I was gearing up for a long, PITA search for a manual, stumbled across your web site, and 4 minutes later was printing it. You folks ROCK!!!!
Craftsman 315.17381

Good Lord!!!!
This was my father's router (and I'm 68 years old). I was gearing up for a long, PITA search for a manual, stumbled across your web site, and 4 minutes later was printing it. You folks ROCK!!!!
Used the manual to get a parts # and, as is the case with many of these old tools my part # is not manufactured any more...
6-610662-00 is a collet and retainer ring. Any idea where I can find one?
Welcome to the forum @DonChris
Thanks Ross! Good to be here... (and yet to discover where "here" really is... :) ).
I would hate to scrap a strong running router just because I can't get a proper collet...
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top