[difalkner]

Welcome to the forum! You'll get a lot more folks reading your posts if you use a few carriage returns and create paragraphs, just an FYI.

 

[difalkner]

Generally you just choose the Post Processor for your machine and the software generates the G-code to suit your controller software. But if it's just a laser then I can tell you the laser shop I do work with sends files straight from CorelDraw to their Epilog laser machines (they have three big ones).

 

[difalkner]

They go from CorelDraw to a Print Driver for the Epilog, set the parameters, then send it to the laser. There is no G-code involved for their use.