Router Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
882 Posts
Discussion Starter #1
I'm pretty sure I have this right but I wanted to ask. I have a tower speaker build going and I'm just about down to shaping the base. The front has a stepped quarter round profile with a 1/2" radius topped with a 1/4" grill with a 1/4" radius as shown in the second pic. I'd like the base to have a similar profile for aesthetics (see third pic).

The plans call for the base to be 1-1/2" thick MDF (2 x 3/4" glued). My plan is to do the profile on the table starting with the 1/2", raising till I get a 1/4" reveal. Then switch to 1/4" and set the fence 1/2" back to align the revealed portion with the bit. (4th and 5th pics).

Is there a better way?
 

Attachments

·
Super Moderator
Joined
·
6,787 Posts
:)
Patrick
Looks good to me ( go for it)
 

·
Official Greeter
Joined
·
18,736 Posts
1 - 3 of 3 Posts
Top