Router Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi all, thanks for admitting me. I’ve just purchased a Shaper Origin (not landed yet) and I’m interested in which software you use and why?
I’ve also watched several videos where people were using 1/16” and 1/32” spiral uncut cutters - they are not easy to come by from my initial google searches - any suggestions of manufacturers/suppliers? I’m based in the UK so they need to be 8mm or 1/8” collet
 

·
Registered
Joined
·
31,264 Posts
Hello N/A and welcome to the forums...
We're happy you found us...

look to burrs for your needs...

.
 

Attachments

·
Administrator
David - Machinist in wood
Joined
·
4,362 Posts
Welcome to the forum, Mark! Add your first name to your profile to clear the N/a in the side panel. Add your location to your profile, as well.

We do like photos so show us your shop, tools, projects, etc. whenever you're ready. What sort of woodworking are you planning with that Shaper Origin or doing now?

I use both Fusion 360 and Carveco on the CAD/CAM side and Mach4 on the CNC controller side.

David
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top