Router Forums banner
1 - 1 of 10 Posts

· Registered
17,598 Posts
I wanted an organizer and winged it . My first attempt consisted of using my dado stack on my table saw to make several slots in the bottom and top section in order to give me different options to move the dividers incase I ever wanted to change their widths .
It looked less than good, so I had to come up with a better mouse trap, and came up with the idea of air-nailing pieces of mdf between the dividers .
By doing it this way , if I want to make any future changes , I just have to pry the existing 1/2” mdf out between the dividers and cut new ones.

While I was at it, I started thinking of storage . Since joining here my drawer making ability has vastly improved , as at one time I was very intimidated at the thought of making drawers .
They have come in very handy, as I keep several air nails and screw diver bits in them
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.