Router Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
8,956 Posts
Hello everyone, I know that Shou Sugi Ban is not a wood specie, but could you share some guides on how to get the best results? I am trying to do some fencing in my house... I need something like this: https://degmeda.eu/
thanks!
Welcome to the forum,(your name here). That is new to me ,I have never heard of it before,very interesting . Are you looking at how to make it, or how to make the fence? I have seen furniture, like pine that has been burned with a butane torch then sanded ,but not as deep as this system.
It would help to know where you are located and what tools you have available,plus a name would help too.
HErb
 

·
Retired Moderator
Joined
·
16,385 Posts
His IP says Estonia. The link appears to be a Japanese company. Ruteronas I would suggest just getting some scrap wood and a propane torch and start experimenting until you achieve close to what you want.
 
  • Like
Reactions: Herb Stoops

·
Registered
Joined
·
2,045 Posts
Interesting but not sure I want my home looking pre-burnt. I'm guessing that charred smell is concealed by a finish? Now another somewhat similar product might be this https://northlandforest.com/cambia-thermally-modified-lumber.html I have used this for an antique Clark telescope tripod with brass hardware and it can also be used as a siding for a building with no fear of boring insects as there is nothing left they want but it's not burnt, Read the process for a more detailed description of how they do this and you'll understand more about it. It does have very fine saw dust when cut.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top