Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
143 Posts
Another source might be Fine Woodworking. Years ago, when they were a fairly new magazine, they did an article on a guy that did some restoration work at a historic site. One of the things he did was to restore some louvered doors. He used a router and a shop made jig to make new stiles. FW printed drawings and photos of the jig he made. Good luck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top