Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Hi all, it would appear that the box is routed out of solid wood. It would be easier to rout the dovetails before the outside edges are rounded, or , alternatively, make the sides seperately as you would normally, face them together in a vice and run the dovetail bit down the centre using a guide. The lid is simply done upside down after due measure checking. Nice box. That's how I would do it anyway.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top