Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,380 Posts
Go to a 30 or 60 degree bit but don't use the ones with the big ends. Stick with the shaft size. I use a 60 degree more than anything and don't cut deeper than .12 inches.

Also remember, the smaller the text the bigger chance for tear out. Time for a laser too!!!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top