Router Forums banner
1 - 1 of 14 Posts

· Registered
95 Posts
I live in northern calif. shop is 110/120 except for tablesaw which is 220 but of course wont be running while router is. Thank you
Generally hand held routers even if table mounted are 120 volt in the US. Virtually all hand held stuff is under 15 amps and the 20 amp plug used for items that use between 15 and 20 amps are VERY rare, even though the electrical outlets that accomidate them are seen everywhere. Just figure 15 amps is as high as you are going, even with a 3hp(peak) router. There msy be bigger indistrial stuff running on 230 volts but you will likely never see one.

Sent from my SM-G900V using Tapatalk
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.