Router Forums banner

soft start/variable speed table setup

32547 Views 175 Replies 27 Participants Last post by  jw2170
greetings all... here is my situation: I've built a custom router table, invested in top of the line accessories blah, blah, blah.. but as of yet, still have not purchased a router. I would idealy want to have remote control (outside of the router box portion of the cabinet) of router motor speed. Right now, the only production router i can find that allows for this is the Milwaukee 5625 sold as a package with remote varialble speed control. This package has reviewed very well and certainly isn't a bad consideration, however, I'd like to know of any other options. From what I've read, the big PC's and Milwaukee's with soft start and VS will not allow for a 'remote' motor speed controller. I've read through the forum and could not find anything that answered my questions, so i figure go straight to the experts..thanks in advance for any assistance...
1 - 1 of 176 Posts
Welcome to Router Forums, I am not sure of any others that come with a remote speed,
and you taught me that one had it. One of the biggest questions are finding a good plate that will fit a particular router, or which router is the best for table, or hand held routing.
If anyone has an answer for you, they will post. Have If you will give us a little more about yourself, We will be able to communicate and hold common interest with you. Who knows, your friend may be a part of Router Forums ;)
1 - 1 of 176 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.