Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
377 Posts
What you bought is what most hobbyist cnc users, and many professionals use, if they have a spindle. Many others use routers. An ATC spindle would probably be at least $2500 on up and is generally found on much higher cost machines.

There is no good way to convert it to an ATC.
 

·
Registered
Joined
·
377 Posts
If you’re just starting out you will find it is not too bad changing bits.

By the way, welcome to the forum and please post on your progress building your machine. Mine is also a DIY and several others here have built a machine (or many machines).
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top