Router Forums banner
1 - 1 of 1 Posts

·
Registered
Mike
Joined
·
3,960 Posts
As Richard says the Automatic Tool Changer spindles are expensive and you have added costs of tool holders. You might also be required to have auto tool length checking systems or have to set the tool lengths when you chuck each tool into its holder.

If you are the adventurous type then you might be interested in this DIY changer project. https://hackaday.io/project/12308-xatc-extreme-simple-automatic-tool-changer
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top