Router Forums banner
1 - 1 of 1 Posts

·
Retired Moderator
Joined
·
16,386 Posts
The MLCS bits are on the low end of the quality scale so you may want to go with a better brand if you have a few windows to do. You may need to size the bit to match what you have. I'm not sure how many options there are. For small bevels I would use a router. There are a lot of different angles available. For large ones, as in the main sill I usually do those on a table saw with the blade beveled. You can do the small ones that way too but there is more sanding involved.
 
  • Like
Reactions: DaninVan
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top