Router Forums banner
1 - 15 of 15 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Good morning:

I was actually trying to find a manual for my old 82193 when I came across this great forum.

Just trying to get my shop up and running again, after retiring as a Building Official. I have been digging out and cleaning up my old tools and jigs from way back when.

Nice forum by the way.

Hank
 

·
Registered
Joined
·
31,264 Posts
hello N/A and welcome to the forums...
see if this manual is of any help to you...
BTW... Bosch is the OEM on that jig...

.
 

Attachments

  • Like
Reactions: Hank Rogers

·
Registered
Joined
·
2,045 Posts
Welcome aboard Hank. Getting the shop in shape and organized is a big job in itself and where I spent a good deal of time re-honing skills by building the needed cabinets, jigs, and so on before tackling the real jobs. So far it's been 95% shop related 5% wood projects.
 

·
Registered
Joined
·
4,625 Posts
Welcome to the Forum, Hank...and back to woodworking...
 
  • Like
Reactions: Hank Rogers

·
Registered
Joined
·
3 Posts
Discussion Starter · #13 ·
Roger the Bosch...

hello N/A and welcome to the forums...
see if this manual is of any help to you...
BTW... Bosch is the OEM on that jig...

.
Rogers on the Bosch...I seem to remember that I purchased it along with my Stanley router (still going strong 35 years later...what a tool). I actually found the original dovetail bit (still sharp), but can't find the collet, but then again I just started looking.

Thank you for the manual, very helpful.

Hank
 

·
Registered
Joined
·
31,264 Posts
yur welcome...
you don't toss anything either I see...

BTW... you gonna change you from N/A to Hank???
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top