Joined
·
3,506 Posts
Alignment with a miter gauge is important for holding a 90* angle but, since a featherboard is put in one place and not moved, unless it is hooked to some fixture that doesn't have an adjustable angle, you can correct for featherboard misalignment.
A featherboard can be simply attached to the table at one point and most have a slot in them for distance from hold down and the board can swivel around the Tee bolt, before the bolt(s) is (are) tightened for use.
A featherboard can be simply attached to the table at one point and most have a slot in them for distance from hold down and the board can swivel around the Tee bolt, before the bolt(s) is (are) tightened for use.
