Router Forums banner

tenon cutter

2442 Views 1 Reply 2 Participants Last post by  kp91
i saw bob using a tenon cutter that cut 1/2 deep.
i cant find one,where do you find one like he uses
1 - 2 of 2 Posts
I think that one is only available as part of their mortise and tenon kit. I use an 1-1/4 straight bit (it's actually a pattern bit), and just cut one cheek at a time.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.