Router Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Anyone have luck making one?
I bought a treadmill roller and it spins on it's own axle which will make it impossible to put a pully on it that will fit under the table (Like the Vdrum).
I've seen many plans and pics from people on the net for drum/thickness sander but few that are like the V drum (Drum under the table).

Any tips etc.?
 

·
Registered
Joined
·
23,786 Posts
HI etivancic

You may want to check out the links below...one has the plans posted so you can make one :)

http://www.routerforums.com/show-n-tell/8383-8-x36-thickness-sander.html
http://www.routerforums.com/show-n-tell/10316-drum-sander-kit-build.html
http://www.theonlinewoodshow.com/show/company.php?number=20102&cat=1&prod=druminst
http://www.theonlinewoodshow.com/show/company.php?number=20102&cat=1&prod=DVD001
==========

Anyone have luck making one?
I bought a treadmill roller and it spins on it's own axle which will make it impossible to put a pully on it that will fit under the table (Like the Vdrum).
I've seen many plans and pics from people on the net for drum/thickness sander but few that are like the V drum (Drum under the table).

Any tips etc.?
 

·
Registered
Joined
·
10,671 Posts
Welcome Eric to the forum. Interesting, did not know what one of those things was called. Thanks for the information. No way to freeze the roller to the axle and put some kind of V pulley on the axle, just wondered.
 
1 - 4 of 4 Posts
Top