Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
387 Posts
The Leigh dovetail jig can be used to do the 3 color dovetail, the side is cut with a different color wood, glue together the the pins to fit is another color. They are assembled with glue, and when dry the side is cut away from the pin board. It is then routed with a smaller bit, and a third board is cut with pins to fit the now smaller dovetail.
Hope this helps, Woodnut65
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top