Router Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I am considering purchasing a Triton 3 hp router Model TRA001. Does anyone know what size the exhaust is on the router. I do have a festool TS75 with hose. Does anyone know if it will fit on the Triton router.

Thanks

Don
 

·
Registered
Joined
·
239 Posts
Don,

The dust port is approx. 1 1/2 inches. I use a Bosch VAC005 5-Meter Vacuum Hose 35mm that I purchased on Amazon. 35mm is 1 1/2 inches. The tool end of the hose is flexible rubber and starts at 1 3/8", tapers to 1 1/2" and fits the Triton perfectly.

Rich
 

·
Super Moderator
John
Joined
·
6,962 Posts
:)
Don, welcome to Router Forums, glad to have you join us, I'm positive the members of the community would be more than willing to answer any questions you have :)
 

·
Official Greeter
Joined
·
19,744 Posts
38mm hose...

Hi Don, welcome to the forum.

The Triton Router is equipped with a Dust
Port (20) for chip extraction above the cut.
It accepts 38mm (1½") O.D. hose, supplied
with the Triton Dust Collector (DCA300).
....from the manual.....
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top