Router Forums banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Community Founder
Joined
·
6,782 Posts
Discussion Starter #1 (Edited)
Welcome to the new tool review forum. As the title describes, this forum will be used for reviews of tools in your workshop. All the reviews are written by members of RouterForums.com. Any user is allowed to write a review at anytime. We ask that all users who are intersted in writting a review, that they please follow the below guidelines.

All reviews should be in the same format as shown below.

Tool: ( the name of tool the review is based on )
Reviewer: ( your RouterForums.com username or your first / last name )
Tool Rating: ( a rating provided by the reviewer, the rating will be out of 10. 1 being the worst and 10 being the best )
Picture: ( provide a picture of the tool up for review ) *optional*
Review: ( the contents of the review )

Note: All reviews that do not follow the review format shown above will be removed from the "Tool Review" forum and relocated into the "Trash Can" forum.

Also, if you find a review on another website and it is written by another person you may post it in this forum. As long as you have recieved that authors permission and you properly link the source of your findings ( ex; Source: http://www.routerworkshop.com ).

If you're intersted in writing your own review, feel free to start up a thread.

If you have any suggestions or additions to the current tool review format pleast either send an email to: [email protected], or post them here.
 

·
Registered
Joined
·
182 Posts
Book Review: "Built-Ins" by Robert J. Settich

I couldn't really find a clear forum for book reviews, but since this book really is a "tool" for the mind, I figured this was as good a fit as any. :D

Tool: "Built-Ins", from Tauton's "Build Like a Pro" series
Reviewer: Bob Ashforth
Tool Rating: 10
Picture: :)
Review: I purchased this book because I thought I might get some useful ideas for a built-in computer workstation for our living room. At $12.97 (on sale at Peachtree), I figured I was more likely than not to find something worth the purchase.

What I found was not just suggestions on specific ways to approach the "problem areas" of building around existing structure (and in my experience most of it nowhere near square), I found what I would describe as a "hands-on reference book."

For example, in a section on shelving, the author cites standard average reach height for males and females of specific heights, as well as standard heights for chairs, tables, and kitchen countertops. (In the latter case there are multiple heights for cooking surfaces, kneading surfaces, and "regular" countertop space.

In the section on installing countertops, the technique of scribing the back edge to take wavy walls into account is described in the context where you actually need to apply it.

Sprinkled throughout the book in each section are sidebars describing "What Can Go Wrong" and "Pro Tips"... for example, cutting the rabbet off the back side of a drawer box so that the bottom can be removed at will.

The description of carcase construction options, again, is in the context of specific applications, with the characteristics of each approach (and the reasons you might want to use it) described in detail.

I treasure the relatively limited access I've had to mentorship in woodworking (a void that these forums fill with warmth, wit, and wisdom), and in this book I see a nice package of "mentor-style" lessons from an expert.

Did I mention that I highly recommend this book? Um, well yeah, I guess so. :)

Bob
 

·
Registered
Joined
·
7 Posts
yes i like those books fromtaunton press i have the one called building and designing cabinets and it too has all kinds of tips and tricks from cabinets to builtins that down right work
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top