Router Forums banner
1 - 1 of 18 Posts

· Registered
1 Posts
Shortening the blade at home is not difficult with an electric jigsaw or circular saw. But you need to use wood clamps to keep the blade from splitting. If the wood peels off, it means it is dry. The door is cut on the workbench, and it is worth remembering that wood poorly absorbs energy, so this wavelength is not recommended for processing this material. The bevel should be horizontal, it is not necessary to cut a solid line or perpendicular to the floor. I made such a mistake and decided not to experiment and buy white interior doors
On a veneered door you need to glue the edge tape, matching its shade to the veneer. If the solid wood is painted, the cut should be covered with paint or varnish
1 - 1 of 18 Posts