Router Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a Triton TRA001 normally mounted on a router table. Today the Spindle Lock did not automatically lock when the plunger was at maximum depth. I removed the router from the table, cleaned and checked adjustments and remove the bit by manually pushing the spindle lock. Still the Spindle Lock does not automatically lock. Has anyone experienced this problem?
 

·
Registered
Joined
·
4,625 Posts
Welcome to the Forum...

Is it possible you did not turn off the switch and the interlock is on...? With the switch left on, the router will not go to max depth...

Just a thought...
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top