Router Forums banner

Triton TRA001

1290 Views 6 Replies 7 Participants Last post by  Raja
I have a Triton TRA001 normally mounted on a router table. Today the Spindle Lock did not automatically lock when the plunger was at maximum depth. I removed the router from the table, cleaned and checked adjustments and remove the bit by manually pushing the spindle lock. Still the Spindle Lock does not automatically lock. Has anyone experienced this problem?
  • Like
Reactions: 1
1 - 1 of 7 Posts
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.