Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I've looked everywhere my search engine took me for flush trim or pattern cutting router bits and I can't seem to find the size I need. :(

Top bearing, 1/4 " Dia. 3/4" long flush trim 1/4" or 1/2" shank preferably carbide tipped or solid carbide.

The corners on the template for most guitar pickups are narrow and I have to keep sanding the corners out by hand. It's an inacurate pain for instruments priced upwards of $2500.

I know the big builders use CNC machines but I don't have the room in my shop or the money to invest in that type of operation.

Thanks for the help, Steve
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #10 ·
Thanks for youer help. I've been buying off Stew Macs for years now. I actually bought the template I'm having trouble with off them. They don't sell the right bit for the corners of the template either, at least not a pattern bit.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top