Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,944 Posts
Hi Steve. Have you seen this bits sold by MLCS? the bottom two are solid carbide with bearings at the tip. the top two are carbide tipped

cat no large dia cut length shank dia
#5498 1/4" 1/2" 1/4"
#5499 1/4" 1" 1/4"
#5089 1/4" 1" 1/4"
#5099 1/4" 1" 1/4"
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top