Router Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
23,786 Posts
That's a great link Router

Many ask how to make a router table that's easy and quick and this one should fit the bill to a T. :)
Plus the link below,the plan to make it. :)

http://www.taunton.com/finewoodworking/FWNPDFfree/RouterTable_Plan.pdf
-------------------
Plus the other links you posted :)

"only plate you'll ever need.
not one but 4 holes for safety pins."

http://www.woodpeck.com/aluminsert.html
http://www.woodpeck.com/tlrphenolicplate.html
http://www.woodpeck.com/inserttemplate.html
-----------------------------------
Plus this link for the Oak-Park products

http://us.oak-park.com/catalogue.html?list=BP--
http://us.oak-park.com/catalogue.html?list=RTA--
-------------------------------------

Maybe Mark will read this and view the links and put it in the Gen'l. Routing/Sticky Notes thing.

Good Job Router

Bj :)
 

Attachments

·
Registered
Joined
·
533 Posts
Discussion Starter · #3 ·
Bj, Now only if I can find me a link to a plate with 8 safety pin holes instead of puny 4.
I have outgrown the 4 pin plate and have come to a conclusion that for safest routing One must use a plate with minimum of 8 safety pin holes. :D


Marry Christmas every one
 

Attachments

·
Registered
Joined
·
23,786 Posts
Hi Router

You can add as many you need I think :)

" You can fool some of the people some of the time but you can't fool all the people all the time "
Not sure if that's right but you know what I mean :) :) :)

Bj :)
 

Attachments

·
Registered
Joined
·
533 Posts
Discussion Starter · #5 ·
Busted :D
Bj, That picture you have posted from WP wed site is Bogus :mad:

Actually ALL their plates have 4 holes even a BLANK plate has 4 holes.
I got into a big argument about that with them.
Few weeks ago I ordered the blank plate for my Jigsaw router table and it has 4 holes for safety schmafety pins. If you look at the poly blank plate
on thier page you will see no holes but look at the poly black plate in my picture, what a surprise when you order one. Their definition of blank plate is no hole for the router. :(
They are safety pin fanatics.
 

·
Registered
Joined
·
23,786 Posts
Hi Router

Here's a snapshot of some Brass pins I made this week and a snapshot of the SNOW in Colorado.

Bj :)

Merry Christmas
 

Attachments

1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top