Router Forums banner
1 - 1 of 1 Posts

· Premium Member
2,734 Posts
Discussion Starter · #1 ·
Well got the DVR up and running. I have been waiting on a surge protector for the lathe as I wanted to protect the computer. I did get to turn in on. Put a nickel on the headstock. Ran the speed from 100 rpm to 3500 rpm and no movement of the nickel. I added 360 lbs. of sand to the base and so it is pretty solid. Got my new Vicmarc chuck in for it. Had to order a new on since the spindle is 1 1/4" X 8 and all my other chucks are 1" X 8. Also got the outboard turning jig mounted. Tools are mounted behind thanks to Mr. Bob Noles. Haven't been able to turn much as we have been running back and forth to Denver with my wife's dad who is not well. Anyway it is now ready to go.


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.