Router Forums banner
1 - 1 of 11 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
I have a project that i hope you guys could help me with.
Am new into this som i ask her for some help.
Here is my idea.
I have a 6 axis robot that take out a plastic part from a injection machine. On this plastic product its a spru that i must milling away.
The idea is that the robot place the plastic product into the milling router and start a easy program that milling the spru.
So, is it possible to start the milling machine with the robot, i have some 1/0 that i could use from the robot(digital output) and which milling rout do you guys recommend for this project.
Hope someone could help me here:)
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.