Router Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
384 Posts
Nice, I think I've got it, but a video would be helpful.

I saw Ron Paulk use a store bought tool for wire wrapping a air hose onto a fitting, instead of using a screw hose clamp. He preferred the wire over a clamp because the wire could be easily covered to protect the customer's door jambs and floors from being scratched by a sharp edged screw type hose clamp.
 

·
Registered
Joined
·
83 Posts
Discussion Starter · #7 ·
The wire binding tool in use.
Pipe Guard rail Handrail Metal Pipeline transport


Guard rail Handrail Iron Fence Metal




Wall Property Roof Tree Brickwork


The tool is used to tension the wire binding and then rotated 180 degrees around the bight to produce 2 clenches secured by the bight. The tails are then trimmed to 1/4" and knocked down. The last image shows a bird feeder hooked on the bracket.
 

·
Retired Moderator
Joined
·
16,385 Posts
I'm starting to see it David but the tying off part is still a little fuzzy.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top