Router Forums banner

Velox VR 3636 CNC Router 2014 Build $4100

2002 Views 4 Replies 2 Participants Last post by  Trevor Ajamil

I am selling my Velox VR3636 CNC machine. It was built in 2014 and is in excellent shape. The CNC is American made in California and features a 36"x 36"x 8" work area. You can find out all about this CNC on Velox's website. This is everything you need to start cutting minus endmills. The machine can also be used as a CNC plasma cutter if you remove the aluminum extruded table. Velox has more information on their website. Asking $4100 for everything

The machine will be left under power so anyone interested can see it running before making their decision.

If you have any questions or would like some more photos please don't hesitate to email me.

Included Items:

Mach 3 and Mach 3 licence
Original Manual and Included CD
UCCNC 300ETH controller adapter. You can control the CNC via an Ethernet Port.
4 Clamps
Precision Collet System for Porter Cable 892 (1/8", 1/4", and 1/2" Collets)
Porter Cable 892
Collet Care Kit

The coolant system (Fogbuster) is not included.

Location is White River Junction, VT. I can be reached at deleted by moderator if you are interested in seeing the machine, want more photos, or have any questions. Thanks for looking!


See less See more
1 - 4 of 5 Posts
That's not a problem. Thanks, I figured one last attempt at selling this machine before I start using it again for projects.
1 - 4 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.