VFD (Huanyang 110v, 1.5kw)wiring to Stepper motor controller board ( TB6560)

scotty3388 · May 1, 2021

Hello folks,

End up, I have a mix of Huanyang 110v 1.5KW spindle with motor and TB6560 stepper motor Controller board. Anyone know how should I connect the line in between 2 devices. I have a 10v, Gnd, AV1 on the TB6560 controller board, and many connections on VFD. Their manual is not helpful at all. do I need to change any setting on Mach 3 software?

Your advise is greatly appreciated.

Current setup is

Huanyang HY01D511B(110v, 1.5kw
TB6560 Stepper Motor controller board
Mach 3 software.

old55 · May 1, 2021

Welcome to the forum.

scotty3388 · May 1, 2021

Thank you.

difalkner · May 1, 2021

This may not be the exact VFD but it might help - http://www.jinlantrade.com/ebay/invertermanual.pdf and 0008.jpg (3456×2304) (jinlantrade.com)

scotty3388 · May 1, 2021

Thank you. I already have those manual, and figured out for main power in, and vfd to spindle. The issues is connection between stepper contriller to vfd.

maddog · May 5, 2021

Go to Youtube and look up CNCNutz. He has some excellent information, and the settings you'll need to change in Mach3

VFD (Huanyang 110v, 1.5kw)wiring to Stepper motor controller board ( TB6560)

Attachments

Top Contributors this Month

Recommended Communities