Router Forums banner
1 - 5 of 5 Posts

·
Administrator
David - Machinist in wood
Joined
·
4,200 Posts
I cut the original top. I removed the case lid and clamped it in the CNC. The top was thick enough for a 2.5mm deep relief cut.
After looking at it again I see it is a relief. I didn't look closely enough the first time and thought it was standing proud of the rest of the top. Good job!

David
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top