Router Forums banner

Wanted! pictures of your router table!

628169 Views 1153 Replies 385 Participants Last post by  FreeTime
Okay members, here is your chance to brag. My son in GA, wants to see pictures of router tables to give him some ideas for his. I told him to look at mine and he don't need to see any others, but he didn't believe me. :)
So here are 3 of mine to get us started. Lets show him what you got.


See less See more
  • Like
Reactions: 5
1 - 1 of 1154 Posts
Has anyone done a table with a hinged top? Am I overlooking anything?
Hi Packard,

My little shop (2/3 of a one car garage) dictated a small router table, here's what I came up with... the front hinges open too, and the knob tightens/loosens the baffle so I can control suction from the port in the back. Although you can not see it, the top is a torsion box using two layers of 3/4" phenolic coated baltic birch ply, wood web in the middle - see screw holes, and formica covering an aluminum mounting plate. hth...:

pardon the mess... had to move a few things to grab a few quick shots as I'm in the middle of a couple projects... :)
See less See more
1 - 1 of 1154 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.