Router Forums banner
1 - 11 of 11 Posts

·
Registered
Retired old fart working with wood
Joined
·
186 Posts
Discussion Starter · #1 ·
I haven’t been in this forum for a while, and just wanted to say hello. I am still running my MillRight MegaV XL and am pumping out a lot of Great stuff with it. I love this machine. I will try to check in more often.
 

·
Registered
Retired old fart working with wood
Joined
·
186 Posts
Discussion Starter · #5 ·
I have a trailer full of inventory, and I am running every day making stuff for the 3 day fall pumpkin fest that I will be attending as a vendor. I can't take pictures of everything I make, but these are a few customer orders and some things I have available.
 
  • Like
Reactions: jw2170

·
Registered
Retired old fart working with wood
Joined
·
186 Posts
Discussion Starter · #9 ·
  • Like
Reactions: jw2170

·
Registered
Sawdust maker
Joined
·
38 Posts
Greeting from Iowa! You are an amazing artist! Just browsed your site and one word wow! Would you recommend the MillRight MegaV XL? Just curious on the software you are using. MillRight is on my short list and VCarve Pro is probably the software choice. I did download the trial version to attempt to master before taking the dive.

thank you for sharing!
 

·
Registered
Retired old fart working with wood
Joined
·
186 Posts
Discussion Starter · #11 ·
Greeting from Iowa! You are an amazing artist! Just browsed your site and one word wow! Would you recommend the MillRight MegaV XL? Just curious on the software you are using. MillRight is on my short list and VCarve Pro is probably the software choice. I did download the trial version to attempt to master before taking the dive.

thank you for sharing!
Yes, I would highly recommend the MillRight MegaV XL. Once you get all the bugs worked out after your build, it is a fantastic CNC very rigid and can carve the hardest of wood at a good speed. A lot of people are cutting aluminum, and some have put lasers on it. Many folks also use a water cooled spindle. I am using a full size Bosh 1617evs router with mine. I had some issues after my build and MillRight's customer service was pretty good at helping me. I have been using mine every day for like 6 hours or so. Once a week I give it a good going over, check for loose stuff, clean it up, and dry lube moveable parts. The MegaV xl is a really good machine for the hobbyist.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top