Router Forums banner

Water cooled 2.2kw conversion finally finished.

1799 Views 6 Replies 6 Participants Last post by  difalkner
After a week or two of tinkering with the "contraption" I'm finally finished so now I can move on to making difalkner's dust shoe and running some dust collector pipe. Then maybe it can start making something instead of me making it. :) https://youtu.be/oDlK7Ig23uY
  • Like
Reactions: 2
1 - 7 of 7 Posts
Sounds a bit like being invaded by space raiders. Looks good seriously. Thanks for posting the video.

4D
Smooth! I like the lighted flow meter. If I had that at least once I'd have to cut with the lights off in the shop! :wink:

David
  • Like
Reactions: 1
Nice setup. I like having the flow meter mounted on top of the Z axis.
That looks awesome , great install . Hey , is the high pitched whine the spindle I’m assuming. I thought it would be quieter than that ?
Boooo Hisssss..... and all this popcorn.
What to do?

Video removed by Joe.
Where'd the video go, Joe?

David
  • Like
Reactions: 1
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top