Router Forums banner

Welcome to the Forums...

25648 Views 12 Replies 4 Participants Last post by  Stick486
Welcome to the forums ...
I'm Stick and do I have some reading for you to do...
much of which can not be ignored or treated lightly ESPECIALLY SAFETY...

there are PDF's here on safety, maintenance, methods, jigs, tooling, accessories, aides,
set up, and so much more...

PLEASE
take the time to read them.. Your health, welfare and safety matter here...

SAFETY

Attachments

  • Like
Reactions: 5
Status
Not open for further replies.
1 - 13 of 13 Posts
15
Part II

General routing...

.

Attachments

See less See more
  • Like
Reactions: 5
Part III

Methods and Applications...

.

Attachments

  • Like
Reactions: 2
8
Part IV...

Jigs and aides..

.

Attachments

See less See more
  • Like
Reactions: 3
5
Part V

Setups...

.

Attachments

See less See more
  • Like
Reactions: 2
5
Part VI

speed...

.

Attachments

See less See more
  • Like
Reactions: 5
@Stick486

PDF of 17 things is attached. It is aimed at beginner to intermediate levels.

Attachments

  • Like
Reactions: 1
Ok. Moved the worthwhile posts to this thread: https://www.routerforums.com/general-routing/138467-posts-moved-welcome-forum.html and cleaned up the ones that were just chatter.
  • Like
Reactions: 4
Ok. Moved the worthwhile posts to this thread: https://www.routerforums.com/general-routing/138467-posts-moved-welcome-forum.html and cleaned up the ones that were just chatter.
thanks...
  • Like
Reactions: 1
Ok. Moved the worthwhile posts to this thread: https://www.routerforums.com/general-routing/138467-posts-moved-welcome-forum.html and cleaned up the ones that were just chatter.

Thanks...
  • Like
Reactions: 1
A new addition from Stick. This is a speed chart for DeWalt routers that show what speed the dial numbers correspond with. It also suggests what speeds to use for different wood types.

Attachments

See less See more
  • Like
Reactions: 2
Instructions for Freud's adjustable rail and stile bit and a bit speed/feed speed chart.

Attachments

  • Like
Reactions: 1
2
DIY Plastic Router base material

Plastic clear bases are a good way to go...
here's some information on the differences between Acrylic VS Polycarbonate for your base...

.

Attachments

See less See more
  • Like
Reactions: 1
1 - 13 of 13 Posts
Status
Not open for further replies.
Top