Router Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
38 Posts
I think it a jig for making a straight edge.The jig uses the fence as a guide.The lip on the back of the jig engages the piece.
 

·
Registered
Joined
·
10,714 Posts
Stan, does the strip across the back of this fixture extend beyond the fixture its self? If it does, I would say you use it to cut very thin strips of wood. You use the fence as a guide and the extended piece just catches the stock to be cut. This is one of the safer ways to cut thin strips of wood.
 

·
Registered
Joined
·
394 Posts
Discussion Starter · #7 ·
JohnH said:
I think it a jig for making a straight edge.The jig uses the fence as a guide.The lip on the back of the jig engages the piece.
Winners...

John and Dr. Zook have it figured out. John described how it was used and the Dr. gave the detailed description. Points are on their way.

Below are the results of using my 'Spline Cutting Jig' -- some inlays to be used in making picture frames.

 
1 - 7 of 7 Posts
Top