Router Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,702 Posts
Discussion Starter · #1 ·
This should be a easy one for most of you. If not I might think you missed something along the way and need to get with the program....

Be the first one to tell us what this tool is used for and how it is used. I want some good details like why you use it (because xxxxx and yyyyyy). I want to see the word "loading" used. Do a really good job this is 200 pointer!

Ed
 

Attachments

· Registered
Joined
·
1,702 Posts
Discussion Starter · #6 ·
It looks like Mark might be starving to death trying to get his can of tuna open with the grinding wheel dresser......

They make a few different types of these but as you have learned they are for exposing fresh material on the grinding wheel. This trues the wheel from being out of round and from pits or grooves caused by another grinding operation. Wheels become glazed or loaded and when this happens they don't cut very well and cause more of a heat build-up thus it is importain to clean the wheels up. If you don't have one and use your grinder do yourself a favor and get something to dress the wheel.....

One thing I should mention as way of a safety tip, never stand in front of your grinder when you turn it on. Wheels can fly apart and this can happen when it is spinning up..... so wait until it has reached speed before stepping up and working.

It looks like jeff12002 gets the nod with his answer. The points are on the way.

Since Dr.Zook had a good answer as well I'll be sending him 100 points for his efforts.

Winner!!!!!!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top