Router Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1,702 Posts
Discussion Starter · #1 ·
Yes I still have too many points so how about another item to view and tell us about. The same rules apply as to the first "What is it?" see:
http://www.routerforums.com/showpost.php?p=6720&postcount=1
if you need to review them.

This next item is very handy and the picture is a little hard to see but let's see how some bright person does to get 100 points. Be the first one with the right answer......
 

Attachments

·
Registered
Joined
·
10,714 Posts
Ed, I can't tell by the picture. It could be a tapered reamer used in reaming out bad screw holes. You then fill in the hole with a dowel, sharpened in a pencil sharpener. They both have the same angle. Dr. Zook
 

·
Registered
Joined
·
41 Posts
reible said:
Yes I still have too many points so how about another item to view and tell us about. The same rules apply as to the first "What is it?" see:
http://www.routerforums.com/showpost.php?p=6720&postcount=1
if you need to review them.

This next item is very handy and the picture is a little hard to see but let's see how some bright person does to get 100 points. Be the first one with the right answer......
I think this one looks like something called "The Plugger by Veritas", sold by Lee Valley.

This reaming bit lets you easily restore stripped screw holes. After using it in your hand drill to ream the hole, you then plug with a dowel sharpened in your pencil sharpener.

It helps to have a Lee Valley store nearby and a Woodworking catalog in my lap.

Cheers,
Brian
 

·
Registered
Joined
·
1,702 Posts
Discussion Starter · #4 ·
Dr.Zook said:
Ed, I can't tell by the picture. It could be a tapered reamer used in reaming out bad screw holes. You then fill in the hole with a dowel, sharpened in a pencil sharpener. They both have the same angle. Dr. Zook
Having posted the first correct answer I will be sending 100 points your way.

One little hint here on the use of this tool. I have found that when you put the dowel in a light tap is fine but if you get a little carried away you might end up splitting the wood...... the cone shape generates a good deal of force as I found out. Also they have ready made tapered dowels with a water activated glue for those of you who are new to this method.

Ed
 

·
Registered
Joined
·
44 Posts
reible said:
Yes I still have too many points so how about another item to view and tell us about. The same rules apply as to the first "What is it?" see:
http://www.routerforums.com/showpost.php?p=6720&postcount=1
if you need to review them.

This next item is very handy and the picture is a little hard to see but let's see how some bright person does to get 100 points. Be the first one with the right answer......
Looks like a hole reamer.

cfm
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top