Router Forums banner

"What is it?" #33

2144 Views 8 Replies 5 Participants Last post by  reible
I have had a few people send comments and I want to thank them for the ideas!

Remember this is your forum and any way we make improve things is going to make it a better place for all of us.

For this "What is it?" we are going to try something different in how we get the winner...... So read this..........

The winner will not be announced for at least a day. When I do return to announce the winner I will see how many posts we have then ask my wife for a number between 1 and the total number of posts. I will then go to that number and see if the answer is correct, if it is then that will be the winner. If the answer is not correct or complete enough I will ask for another number and so on until the winner is found. So if you post first or last that will not count.... it will be a random pick by someone who has not see your posts or know your names/handles.......

OK I hope that is clear.

Remember not just the name.... give details as to how you use it or what it does and this time it might not be the first write answer it might be the 10th or "nnn" depending on the number of answers posted...... I will check sometime after 24 hours so you have at least that amount of time to do your entry.

Good luck.... and for this one the winner will get 100 points!

Ed

Attachments

See less See more
1 - 1 of 9 Posts
Hi Ed: It's a mortice chisel and bit. It can be used in a drill press with a morticeing
attachment or dedicated mortice machine. The drill bit in the picture is withdrawn and does not show except for the end that is normally locked into the chuck. A an aside from this I once was in a Woodworkers Wharehouse Store, and someone was complaining that he bought a chisle an bit set and could'nt get it to work, it turned out that he tried to lock the chisel portion into his drill press chuck. He did 'nt have
a mortice attachment,so the chisel would cut a pecuiliar hole and then break. It was
very hard to keep a straight face at that point.
Woodnut65
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top